Astm Standards

A1-00(2005) Standard Specification for Carbon Steel Tee Rails
A2-02 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
A3-01(2006) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
A6/A6M-06 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A20/A20M-06 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A27/A27M-05 Standard Specification for Steel Castings, Carbon, for General Application
A29/A29M-05 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
A31-04e1 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
A34/A34M-06 Standard Practice for Sampling and Procurement Testing of Magnetic Materials
A36/A36M-05 Standard Specification for Carbon Structural Steel
A47/A47M-99(2004) Standard Specification for Ferritic Malleable Iron Castings
A48/A48M-03 Standard Specification for Gray Iron Castings
A49-01(2006) Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
A53/A53M-06a Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A65-01 Standard Specification for Steel Track Spikes
A66-01 Standard Specification for Steel Screw Spikes
A67-00(2005) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
A74-06 Standard Specification for Cast Iron Soil Pipe and Fittings
A82/A82M-05a Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
A90/A90M-06 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A99-03 Standard Specification for Ferromanganese
A100-04 Standard Specification for Ferrosilicon
A101-04 Standard Specification for Ferrochromium
A102-04 Standard Specification for Ferrovanadium
A105/A105M-05 Standard Specification for Carbon Steel Forgings for Piping Applications
A106/A106M-06a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A108-03e1 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A109/A109M-03 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A111-99a(2004)e1 Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire
A116-05 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
A121-99(2004) Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
A123/A123M-02 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A125-96(2001) Standard Specification for Steel Springs, Helical, Heat-Treated
A126-04 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A128/A128M-93(2003) Standard Specification for Steel Castings, Austenitic Manganese
A131/A131M-04ae1 Standard Specification for Structural Steel for Ships
A132-04 Standard Specification for Ferromolybdenum
A134-96(2005) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A135/A135M-06 Standard Specification for Electric-Resistance-Welded Steel Pipe
A139/A139M-04 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A143/A143M-03 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A144-04 Specification for Ferrotungsten
A146-04 Standard Specification for Molybdenum Oxide Products
A148/A148M-05 Standard Specification for Steel Castings, High Strength, for Structural Purposes
A153/A153M-05 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A159-83(2006) Standard Specification for Automotive Gray Iron Castings
A167-99(2004) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A176-99(2004) Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
A178/A178M-02 Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A179/A179M-90a(2005) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A181/A181M-06 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
A182/A182M-06 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A183-03 Standard Specification for Carbon Steel Track Bolts and Nuts
A184/A184M-06 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
A185/A185M-06e1 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
A192/A192M-02 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

A193/A193M-06a Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
A194/A194M-07 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A197/A197M-00(2006) Standard Specification for Cupola Malleable Iron
A203/A203M-97(2003) Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A204/A204M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
A209/A209M-03 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A210/A210M-02 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A213/A213M-06ae1 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A214/A214M-96(2005) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A216/A216M-04 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A217/A217M-04 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A220/A220M-99(2004) Standard Specification for Pearlitic Malleable Iron
A225/A225M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
A227/A227M-06 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
A228/A228M-02 Standard Specification for Steel Wire, Music Spring Quality
A229/A229M-99(2005) Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
A230/A230M-05 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
A231/A231M-04 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
A232/A232M-05 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
A234/A234M-06a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A239-95(2004) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
A240/A240M-06c Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A242/A242M-04e1 Standard Specification for High-Strength Low-Alloy Structural Steel
A247-06 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
A249/A249M-04a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A250/A250M-05 Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
A252-98(2002) Standard Specification for Welded and Seamless Steel Pipe Piles
A254-97(2002) Standard Specification for Copper-Brazed Steel Tubing
A255-02e1 Standard Test Methods for Determining Hardenability of Steel
A262-02ae3 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A263-03 Standard Specification for Stainless Chromium Steel-Clad Plate
A264-03 Specification for Stainless Chromium-Nickel Steel-Clad Plate
A265-03 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
A266/A266M-03a Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
A268/A268M-05a Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A269-04 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A270-03a Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
A275/A275M-06 Standard Test Method for Magnetic Particle Examination of Steel Forgings
A276-06 Standard Specification for Stainless Steel Bars and Shapes
A278/A278M-01(2006) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
A283/A283M-03 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A285/A285M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A288-91(2003) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A289/A289M-97(2003) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
A290/A290M-05 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A291/A291M-05 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A295/A295M-05 Standard Specification for High-Carbon Anti-Friction Bearing Steel
A297/A297M-97(2003) Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A299/A299M-04 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A302/A302M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A304-05e2 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A307-04e1 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A308/A308M-06 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A311/A311M-04 Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A312/A312M-06 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A313/A313M-03 Standard Specification for Stainless Steel Spring Wire
A314-97(2002) Standard Specification for Stainless Steel Billets and Bars for Forging
A319-71(2006) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts

A320/A320M-05a Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
A321-90(2001) Standard Specification for Steel Bars, Carbon, Quenched and Tempered
A322-06 Standard Specification for Steel Bars, Alloy, Standard Grades
A323-05 Standard Specification for Ferroboron
A324-73(2004) Standard Specification for Ferrotitanium
A325M-05 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
A325-06 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A327-91(2006) Standard Test Methods for Impact Testing of Cast Irons
A327M-91(2006) Standard Test Methods for Impact Testing of Cast Irons (Metric)
A328/A328M-05 Standard Specification for Steel Sheet Piling
A333/A333M-05 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
A334/A334M-04a Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A335/A335M-06 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A336/A336M-06a Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A338-84(2004) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
A340-03a Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
A341/A341M-00(2005) Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
A342/A342M-04 Standard Test Methods for Permeability of Feebly Magnetic Materials
A343/A343M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
A345-04 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
A348/A348M-05 Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
A350/A350M-04a Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A351/A351M-06 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
A352/A352M-06 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A353/A353M-04 Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
A354-04e1 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A355-89(2006) Standard Specification for Steel Bars, Alloys, for Nitriding
A356/A356M-05 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
A358/A358M-05 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A363-03 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A367-60(2005) Standard Test Methods of Chill Testing of Cast Iron
A368-95a(2004) Standard Specification for Stainless Steel Wire Strand
A369/A369M-06 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A370-06 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A372/A372M-03 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A376/A376M-06 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A377-03 Standard Index of Specifications for Ductile-Iron Pressure Pipe
A380-06 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A381-96(2005) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
A384/A384M-02 Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A385-05 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A387/A387M-06a Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A388/A388M-05 Standard Practice for Ultrasonic Examination of Heavy Steel Forgings
A389/A389M-03 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A390-06 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

A391/A391M-01 Standard Specification for Grade 80 Alloy Steel Chain
A392-06 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A394-05e1 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A395/A395M-99(2004) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A400-69(2006) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
A401/A401M-03 Standard Specification for Steel Wire, Chromium-Silicon Alloy
A403/A403M-06 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A407-93(2004) Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
A409/A409M-01(2005) Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A411-03 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A413/A413M-01 Standard Specification for Carbon Steel Chain
A414/A414M-06 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
A416/A416M-06 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A417-93(2004) Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units
A418/A418M-05 Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
A420/A420M-06 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A421/A421M-05 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A423/A423M-95(2004) Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A424-06 Standard Specification for Steel, Sheet, for Porcelain Enameling
A426/A426M-05 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A427-02 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
A428/A428M-06 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A434-06 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A435/A435M-90(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A436-84(2006) Standard Specification for Austenitic Gray Iron Castings
A437/A437M-06 Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
A439-83(2004) Standard Specification for Austenitic Ductile Iron Castings
A447/A447M-93(2003) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A449-04be1 Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A450/A450M-04a Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
A451/A451M-06 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
A453/A453M-04 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A455/A455M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
A456/A456M-99(2003) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
A459-97(2003) Standard Specification for Zinc-Coated Flat Steel Armoring Tape
A460-94(2004)e1 Standard Specification for Copper-Clad Steel Wire Strand
A463/A463M-06 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A466/A466M-01 Standard Specification for Weldless Chain
A467/A467M-01(2006) Standard Specification for Machine and Coil Chain
A469/A469M-06 Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
A470/A470M-05e1 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A471-06 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A472/A472M-05 Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings
A473-01 Standard Specification for Stainless Steel Forgings
A474-03 Standard Specification for Aluminum-Coated Steel Wire Strand
A475-03 Standard Specification for Zinc-Coated Steel Wire Strand
A476/A476M-00(2005) Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
A478-97(2002) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A479/A479M-06a Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A480/A480M-06b Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A481-05 Standard Specification for Chromium Metal
A482-05 Standard Specification for Ferrochrome-Silicon
A483-04 Standard Specification for Silicomanganese
A484/A484M-06b Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A485-03 Standard Specification for High Hardenability Antifriction Bearing Steel
A487/A487M-93(2003) Standard Specification for Steel Castings Suitable for Pressure Service
A488/A488M-06 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A489-04e1 Standard Specification for Carbon Steel Lifting Eyes
A490-06 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
A490M-04ae1 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
A491-03 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A492-95(2004) Standard Specification for Stainless Steel Rope Wire
A493-95(2004) Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A494/A494M-05 Standard Specification for Castings, Nickel and Nickel Alloy
A495-06 Standard Specification for Calcium-Silicon Alloys
A496/A496M-05 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
A497/A497M-06e1 Standard Specification for Steel Welded Wire Reinforcement, Deformed, fo

A498-06 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
A499-89(2002) Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails
A500-03a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A501-01(2005) Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A502-03 Standard Specification for Rivets, Steel, Structural
A503/A503M-01(2006) Standard Specification for Ultrasonic Examination of Forged Crankshafts
A504/A504M-04e1 Standard Specification for Wrought Carbon Steel Wheels
A505-00(2005) Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A506-05 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A507-06 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A508/A508M-05b Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A510-06 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
A510M-06 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
A511-04 Standard Specification for Seamless Stainless Steel Mechanical Tubing
A512-06 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A513-06b Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A514/A514M-05 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A515/A515M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A516/A516M-06 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A517/A517M-06 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A518/A518M-99(2003) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A519-06 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A521/A521M-06 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
A522/A522M-06 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A523-96(2005) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
A524-96(2005) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A529/A529M-05 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A530/A530M-04a Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A531/A531M-91(2006) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A532/A532M-93a(2003) Standard Specification for Abrasion-Resistant Cast Irons
A533/A533M-93(2004)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A534-04 Standard Specification for Carburizing Steels for Anti-Friction Bearings
A536-84(2004) Standard Specification for Ductile Iron Castings
A537/A537M-06 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
A540/A540M-06 Standard Specification for Alloy-Steel Bolting Materials for Special Applications
A541/A541M-05 Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A542/A542M-99(2004)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
A543/A543M-93(2004)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
A550-06 Standard Specification for Ferrocolumbium
A551/A551M-05 Standard Specification for Steel Tires
A553/A553M-06 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
A554-03 Standard Specification for Welded Stainless Steel Mechanical Tubing
A555/A555M-05 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A556/A556M-96(2005) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A560/A560M-05 Standard Specification for Castings, Chromium-Nickel Alloy
A561-71(2004) Standard Practice for Macrotech Testing of Tool Steel Bars
A562/A562M-06 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
A563-04a Standard Specification for Carbon and Alloy Steel Nuts
A563M-06 Standard Specification for Carbon and Alloy Steel Nuts [Metric)
A564/A564M-04 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

A565/A565M-05a Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A568/A568M-06a Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A571/A571M-01(2006) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
A572/A572M-06 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A573/A573M-05 Standard Specification for Structural Carbon Steel Plates of Improved Toughness
A574-04e1 Standard Specification for Alloy Steel Socket-Head Cap Screws
A574M-04e1 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
A575-96(2002) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A576-90b(2006) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A577/A577M-90(2001) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578/A578M-96(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications
A579/A579M-04a Standard Specification for Superstrength Alloy Steel Forgings
A580/A580M-06 Standard Specification for Stainless Steel Wire
A581/A581M-95b(2004) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A582/A582M-05 Standard Specification for Free-Machining Stainless Steel Bars
A586-04a Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
A587-96(2005) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A588/A588M-05 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick
A589/A589M-06 Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A592/A592M-04 Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
A595/A595M-06 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
A596/A596M-95(2004) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A597-87(2004) Standard Specification for Cast Tool Steel
A598/A598M-02 Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
A599/A599M-02 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A600-92a(2004) Standard Specification for Tool Steel High Speed
A601-05 Standard Specification for Electrolytic Manganese Metal
A602-94(2004) Standard Specification for Automotive Malleable Iron Castings
A603-98(2003) Standard Specification for Zinc-Coated Steel Structural Wire Rope
A604-93(2003) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A606-04 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A608/A608M-06 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature
A609/A609M-91(2002) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A610-79(2004) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A612/A612M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A615/A615M-06a Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A618/A618M-04 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A623-06a Standard Specification for Tin Mill Products, General Requirements
A623M-06a Standard Specification for Tin Mill Products, General Requirements [Metric]
A624/A624M-03 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A625/A625M-03 Standard Specification for Tin Mill Products, Black Plate, Single Reduced
A626/A626M-03 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A627-03 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional

A630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A632-04 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A633/A633M-01(2006) Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A635/A635M-06a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A636-76(2004) Standard Specification for Nickel Oxide Sinter
A638/A638M-00(2004) Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A640-97(2002)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A641/A641M-03 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A644-05 Standard Terminology Relating to Iron Castings
A645/A645M-05 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A646/A646M-06 Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A648-04a Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
A649/A649M-04 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A650/A650M-03 Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A653/A653M-06a Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A656/A656M-05e1 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A657/A657M-03 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A659/A659M-06 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A660-96(2005) Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A662/A662M-03 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A663/A663M-89(2006) tandard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A664-06e1 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A666-03 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A667/A667M-87(2003) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A668/A668M-04 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A671-06 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A672-06 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A673/A673M-05a Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A674-05 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A675/A675M-03e1 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A677-05e1 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
A678/A678M-05 Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
A679/A679M-06 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A681-94(2004) Standard Specification for Tool Steels Alloy
A682/A682M-05 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
A683-05e1 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
A684/A684M-06 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A686-92(2004) Standard Specification for Tool Steel, Carbon

A738/A738M-05 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A739-90a(2006) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A740-98(2003) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A741-98(2003) Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
A742/A742M-03 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A743/A743M-06 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744/A744M-06 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A745/A745M-94(2003) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
A746-03 Standard Specification for Ductile Iron Gravity Sewer Pipe
A747/A747M-04 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A748/A748M-87(2003) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A749/A749M-97(2002) Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A751-01(2006) Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A752-04 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
A752M-04 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
A753-02 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
A754/A754M-06 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A755/A755M-03 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A756-94(2001) Standard Specification for Stainless Anti-Friction Bearing Steel
A757/A757M-00(2004) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A758/A758M-00(2005) Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
A759-00(2005) Standard Specification for Carbon Steel Crane Rails
A760/A760M-06 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A761/A761M-04 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A762/A762M-00 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A763-93(2004) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A764-95(2001) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A765/A765M-04 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A767/A767M-05 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A768/A768M-05 Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
A769/A769M-05 Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
A770/A770M-03 Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A772/A772M-00(2005) Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
A773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
A774/A774M-06 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A775/A775M-06 Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A778-01 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A779/A779M-05 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
A780-01(2006) Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanize